CARDAQ-PLUS J2534 Device Support Audi/VW/BMW/Honda/GM/Land Rover/Jaguar/Volvo/Toyota/Bugatti

 

CARDAQ-PLUS SAE J2534-1 & J2534-2 Scanner is used for diagnosis and programing.and one hardware can support different vehicle software. Package come with one software for free, other software if you need, need pay additional cost for it.

Support GM/BMW/VW/AUDI/Jaguar/LandRover/Volvo/Bugatii/Honda/Toyota, 

 

CARDAQ-PLUS  Support Language: English+Spanish

 

Super CarDAQ-Plus J2534 pass-thru 

 

CarDAQ Plus J2534 Device is available for Honda, Toyota, BMW, Jaguar, Landrover, VW, Audi, Seat, Skoda, Bentley, Lamborghini, volvo and so on. J2534 CarDAQ Plus supports SAE J2534-1 and J2534-2.

 

CarDAQ Plus J2534 Device is used for Diagnostic / Reprogramming on cars. And it can work with Honda, Toyota, BMW, Jaguar, Landrover, VW, Audi, Seat so on.

 

 

CARDAQ-PLUS SAE J2534-1 & J2534-2 Scanner Connection

 

 

Note:

 

Different Item # needs different operating system.It may take 2-3 days to install software and test, so please kindly note.

Thank you for your consideration.

 

GM/OPEL   XP/WIN7

BMW/BMW MINI/BMW Motorcycle/Rolls-Royce  WIN8

VW AUDI SEAT Lamborgini Bently   WIN7

Jaguar Land Rover   WIN7

Volvo   WIN7

Bugatti   WIN7

Benz/Smart/Benz Truck/Maybach/Setra/Gobus/Mitsubishi Fuso   WIN7

Honda/Acura WIN7

Toyota/LEXUS/SCION   WIN7

 

CarDAQ J2534 DeviceTechnical Specs:

 

Vehicle: 12V Cars only, not work for 24V trucks

Connection: Connect laptop via USB cable, has no Wifi function.

Cables: USB Cable and OBDII Cable (Cables for Old car is optional)

Software: In 160GB SATA HDD, software are preinstalled on WIN8 (32bit$ 64Bit) or WIN 7 system or XP system, it applies to most laptops which can run SATA HDD. 

Protocol: Support J2534-1 and J2534-2.

Bus Protocols

CAN Bus (capable of ISO 15765, GMLAN, J1939, and ISO14229)

2nd CAN (Dual or Single Wire)

Ford SCP (J1850PWM)

GM Class2 (J1850VPW)

KWP2000 (ISO9141/14230)

Chrysler SCI (J2610)

PC Interfaces

USB

Wired RJ45 Ethernet

 

Other:

 

Compliant to SAE J2534 (Feb 2002) and SAE J2534-1 (Dec 2004)

Compliant to ISO 22900-1 MVCI physical layer

Programming voltage on J1962 pin 6, 9, 11, 12, 13, 14 or Aux

6 General purpose analog inputs (0-27V, 2Ksps, 12 bit)

Ground pins 9, 12, or 15

Internal Compact Flash slot (must be configured when ordering)

Optional external Compact Flash slot

 

Customers Uses:

 

J2534 Independent Repair Facility tool

Bench top ECU reprogramming

In-Vehicle ECU reprogramming

Diagnostics using 3rd party applications *

In-vehicle pass-thru data logging

Standalone data logging or monitoring

Fleet or public transportation data acquisition

OEM Engineering

OEM calibration reprogramming

End-of-Line testing

Dealer Service Tools

3rd party integrated solutions

 

Package List : 

 

1 x CarDAQ-Plus interface 

1 x USB cable

1 x OBD II cable 

1 x Software HDD(160 GB) 

1 x USB Key for software security