Similar Products Featured

Auto Diagnostic Tool

OPCOM OP-COM V1.59 Can OBD2 2012V For Opel Scan Tool with PIC18f458 Chip
  • Model: ADT115
  • Shipping Weight: 0.2kg

Price:   $19.00  $16.00

1 reviews
Add to Cart:
Tech Support
    OPCOM OP-COM V1.59 Can OBD2 2012V For Opel Scan Tool with PIC18f458 Chip
    OPCOM diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H,Zafira-B.It lets you read and clear fault codes,support many control units.
    New OPCOM V1.59 Firmware 2012V Software Feature:
    1. OPCOM is a special PC Based diagnostic interface especially for OPEL.
    2. Software Version: 2012/VAUX-COM 120309a    Firmware Version: 1.59
    3. Never Update It Online, It Will Damage The OP-COM !
    4. Supports Cars to Year 2014
    Notice of using OP-Com 2012 V software
    1.You have to install this "dotnetfx35_SP1" system patch ,or system won't run
    2.If you run WIN7 ,you have to open the software as Administrator mode,and refer to the installing video carefully inside the CD 
    1.It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
    2.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
    3.The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
    4.Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
    PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
    5.Fault codes will be shown with all available information:
    Opcom Full fault code text description
    1) Full status information (Present, Not present, Intermittent)
    2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
    3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
    4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
    You can also run output tests on many controllers.
    HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
    MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
    SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
    Package list:
    1.OP COM Interface
    2.USB Cable
    3.Software and Drivers CD

    by ben hamed Abdelbasset
    Date Added: 05/13/2016
    Hello I received my order op com can you give me a video or installation procedure please because when I install I have a 1.39 softwware thank you

    Hello Ben Hamed Abdelbasset

    Thanks for your message.

    Please check the Software CD for the installation steps.thanks.

    Best Regards













    Notice:  please do not leave any  messages on Paypal


    Bank transfer(T/T):
    Notice:  Please Pay the Bank Charges, Otherwise the bank will charge it from payment, and after paid let us know.


     Notice:  Please Inform us  MTCN  after paid,  and sent  full address, postal code and phone number for shipping .

     Notice:  Please Inform us  Reference Number, Sender's First name and Sender's Last name  after paid.


Write A Review:
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.

CAPTCHA Error: Session not started. The CAPTCHA cannot be used!