Launch X431 PAD V (PAD 5) Universal Diagnostic System with Smart Box 3.0 with ADAS Calibration Supports ECU Programming

 

LAUNCH X431 PAD V 10.1 inch & 5G Wi-Fi Professional diagnostic tools online programming tools, auto full system code reader scanner with  26+ special (reset) function ,TPMS?ADAS system calibration, 4GB RAM+ 64GB ROM (can extend up to 128GB).

 

Launch X431 PAD V Scanner Highlights

 

Topology Mapping 

ADAS calibration Supported

Advanced ECU programming & coding 

VW & Audi Guided Functions 

Compatible with J2534 & DoIP 

26 Bi-directional Special Service Functions 

supports LAUNCH extension module applications for oscilloscopes, sensors, endoscopes, multimeters, and battery detection etc.

 

 

X431 PAD V Features:

 

1. Android 7.1 customized system, Qualcomm 8-core processor, 10.1 inch capacitive touch screen, support QC3.0 fast charging.

 

2. 2.4GHz & 5GHz Dual-Frequency Wi-Fi, the transmission rate is faster than the previous generation.

 

3. Support commercial vehicle and passenger car diagnose, Support J2534, CAN FD, DoIP.

 

4. Wide mode coverage, powerful and a large number?of diagnostic functions, and accurate test data.

 

5. Brand new industrial design, with soft rubber sheath on the four corners of the product, to effectively prevent collision; damping shaft, free adjustment of nearly 180 degrees; support three modes of hanging, support and normal.

 

6. Full vehicle system coverage for over 110 brands in the world, which is continually updated

 

7. Full-function scan tool for both 12V cars and 24V 36V heavy duty (heavy duty need to purchase additional software)

 

8.  Online Programming:

BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru

LAUNCH X431 PAD V supports SCN coding until the 2020 model!

Note: Online Programming function has not been authorized in the USA, Canada, and Spain.

 

9. Multi-Language:

Italian English Chinese German Japanese Russian French Spanish Portuguese Polish Turkish Dutch Greek Danish Arabic Korean Persian Finnish Swedish Romanian Czech Hungarian

 

10. Update:

Free Update online for 1 year.  It takes $399 annual upgrade after that. 

 

11. Support some car makes coverage till 2021, incl. BMW, Benz, VW, Audi, GM, Ford, Chrysler, Toyota, Nissan, Honda, Land rover etc

 

 

Launch X431 PAD 5 Functions:

 

1. Comprehensive diagnosis: Support full-make, full-system, full-function rapid diagnosis, read DTC, clear DTC, read data stream, actuation test, etc.

 

2. Intelligent diagnose: Support intelligent VIN identification and cloud-based diagnostic record query, making the diagnostics more intelligent and efficient.

 

3. Local diagnose: When the intelligent diagnosis is not available in an environment without network, choose traditional diagnosis. Select the vehicle make and model manually to perform the vehicle detection.

 

4. Remote diagnose: Support online real-time communication and remote diagnostic service through text, picture, and file between device and device, and between device and remote desktop, with low network bandwidth and system resources occupancy.

 

5. Special function: Support total 16 special functions, including service lamp reset, throttle adaptation, steering angle reset, brake pad reset, tire pressure reset, anti-theft matching, ABS bleeding, battery matching, gear learning, injector coding, DPF regeneration, sunroof initialization, headlamp matching, suspension matching and AT matching, EGR Adaption.

 

6. Software upgrade: Support one-click upgrade of operation system, client side, car model software and firmware.

 

7. Diagnostic feedback: For model software and function errors met during the use, please submit the feedback immediately. LAUNCH will response as soon as possible.

 

8. My report: View comprehensive diagnostic report, remote diagnostic report, and data stream playback.

 

9. Settings: Contains my connector, diagnostic connector connection management, connector activation, firmware repair, etc.

 

 10. Extended module: Support oscillograph, sensor, battery test, endoscope, Wi-Fi printer, etc.

 

11. Guided function for VW and Audi

 

12. 26 special service functions available

 

13. ADAS calibration function is optional

 

14. Support USB Type C & Type A

 

 

Diagnostic Mode:

 

1. In-depth diagnostics: Supports system diagnostics, full special functions, reading and clearing errors, viewing data stream, activating the system on the vehicle, ...

2. Smart diagnostics: Automatically identify VIN and check information on the server, making diagnostics smarter and more efficient.

3. Local diagnostics: When there is no internet, the manual vehicle selection is also very easy.

4. Remote diagnosis: using Teamviewer software to connect the Garage with technicians for technical support.

 

 

Active Test (Bi-directional Control)

 

Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.

 

ECU Coding (Online Coding)

 

Match, learn, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements

 

 

Service function list

 

Vehicle type: Passenger vehicle, Heavy duty (equipped smart box 3.0)

System diagnosis: Access all module in all module

Remote diagnosis Yes

Guide function Yes

Programming Yes

TPMS Service Yes

ADAS Calibration Optional

Service function 26

Break pad reset Yes

Battery matching Yes

Steering angle reset Yes

Throttle adaption Yes

DPF reg. Yes

ABS blake bleeding Yes

Anti theft matching Yes

Tire pressure reset Yes

Injector coding Yes

Gear learning Yes

Sunroof initialization Yes

Headlamp matching Yes

Suspension matching Yes

AT matching Yes

EGR adaption Yes

 

 

Key Programming

 

Add a new programmed key. PIN code is required

 

 

Accurate ADAS Calibration functions

 

Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting. (NOTE: Need to be purchased separately)

 

 

 

TPMS Diagnostic Function

 

LAUNCH X431 PAD V can work with wireless tire pressure diagnostic tootoachieve the features of TPMS activation, programming and learning.((NOTE: Need to be purchased separately))

a)Activation:to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status.

b)Programming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication.

 

 

Remote Diagnose

 

help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster.could access remotely and quickly via mobile phone, tablet and computer, with low bandwidth and system resource occupancy. It also can "Add friend " , can add the one who also use launch product , then you can comunicate with them in X431 Pro3s , if you have problem to car repair , you can talk with them online , they can help you.

 

 

Online Database

 

is fully filled with abundant repair cases and automotive technology handbook for your easier retrieval and reference.

 

 

With topological diagram Function

 

it can shows All car system in the Diagram , better to let you know the car clearly and simple !

 

Diagnostic history and diagnostic feedback

 

Generally once a vehicle diagnosis is performed, the tool will record the every details of diagnostic process. The History function provides direct access to the previously tested vehicles and users can resume from the last operation, without the necessity of starting from scratch. for any problem found during the diagnoss, submit the vehicle issue to us for analysis and troubleshooting.

 

 

X-431 PAD V Parameters:

 

Processor	8 core Cortex-A53 2.0GHz
Cache	4GB
Hard Disk	64GB, 128G extended
System	Android 7.1
Screen	10.1 inch full-fitting, sunlight readable screen (Gorilla Glass)
Resolution	1920*1200
Wi-Fi	Support 2.4GHz&5GHz dual frequency
Camera	Rear13 Megapixels, front 8 Megapixels
Diagnostic Mode	WI-FI
Work Temperature	-10 ~ 50?
Dimension	320×211×46mm

 

 

SmartBox3.0

 

Smart Box 3.0, the new VCI with Linux system, supports USB, Bluetooth and WiFi connection, is comptibnle with  CANFD, DoIP, J2534 and other diagnostic protocols. More powerful functions to be discovered by working with X-431 PAD V. 

 

The VCI "SmartBox3.0", which can only be used with PAD V, supports up to 36 volts.

 

Smart box 3.0 supports heavy-duty, medium-duty, light trucks. (Require extra software payment for heavy-duty models)

Smart box 3.0 covers all diagnostic protocols, J2534, D-PDU, RP1210, CAN FD, DoIP.

 

Support J2534/RP1210/D-PDUdiagnostic standard, can be used alone with part of the original diagnostic software.

 

 

Main parameters	Main structure	Dual processor: Cortex – A7 + Cortex – M7
	System	Linux
	Memory	256M
	Storage	8GB
	Power supply	DC 9 ~36V
External interface	USB	Type B USB 2.0
	Bluetooth	BLE 4.0 + EDR
	WIFI	Support 2.4G/5GHZ dual-band
	Indicator lamp	5 multifunction indicator lamps
	Vehicle connection	J1962  16PIN

 

 

Smart box 3.0 connection:

Smartbox3.0 comes with a USB cable. 

One end of Smartbox3.0 is connected to the USB cable: one port of the USB cable is connected to Smartbox3.0; the other port is connected to a USB port of a PC; the other end of Smartbox3.0 is connected to the OBD interface bus, and the other port of the bus is connected to the OBD connector.

  

Extension optional modules:

 

. Endoscope

. S2-2 Sensor box

. VSP-600 Multimeter

. BST360 Battery tester

. O2-1 Scope box

.  X-prog 3

.  X-431 TSGUN

. WiFi printer 

 

 

Passenger vehicles (12V):

 

1. Australian:  AUST Holden, AUST Ford

 

2. Asian: Toyota/Lexus, Honda/Acura, Mazda, Subaru, Nissan/Infiniti, Mitsubishi, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti

 

3. European: Audi, Mercedes/Maybach, BMW/MINI/Rolls Royce, VW/Bentley/Bugatti, Opel/Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault/Dacia, Fiat/Romeo/Abarth/Lancia, Rover, Landrover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Arston Martin, Porsche, Jaguar

 

4. USA: USA Ford/ Lincoln, GM/ Buick/ Cadillac/ Chevrolet, Chrysler/ Dodge/ Jeep

 

5. Chinese: Changcheng(Great Wall), Geely, Qirui_TY(Cherry), Futian, Changan, Changhe, Haifei ….etc.

 

6. Special: Immobilizer/Key, Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS

 

7. Others: EOBD, Demo

 

 

Heavy Duty Truck Vehicles (24V) (Need to Purchase Heavy Duty Software):

 

Software Coverage:

Nissan (Diesel)

Mitsubishi (Diesel)

USA Ford Diesel, Kenworth

Astra, Benz Heavy Duty,  Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel

Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty

Iveco Heavy Duty, JAC Heavy Duty, Mack , MAN , OBD Heavy Duty, Scania, Shangchai Diesel, Volvo Heavy Duty

WP Diesel, Airbus, Allison Transmission Box, Ashok Rejlander, Bendix ABS, Caterpillar Heavy Duty

Chai Heavy Vehicle, Chaoyang Diesel, Construction Machinery, CREDO Heavy Vechicle, Detroit Engine

Dongfeng Commercial Vehicle, Dongfeng Yufeng, Doosan Engine, Freightliner Heavy Duty Truck

Full Diesel Diagnosis Software, Haldex ABS Heavy Duty, HD_ABS System, HD_GoldenDragon, HD_International

HD_Kinglong, HD_Maxxforce, HD_Tata, HD_Western_Star, Heavy Truck Presentation Software

IRISBUS HD, IRIZAR HD, NEOPLAN HD, Peter HD, Renault HD, SETRA HD, Stannic Bavin, Sterling HD

Sunlong Bus, Sunwin Bus, UD Trucks 2F Nissan Diesel, WABCO ABS, Yang Chai Engine

IVECO Diagnostic List for LANCH X431 PADV Scanner

 

Powerful special functions:

Component Replacement, Cylinder Compression Test, Injector Cut Out Test, DPF Regeneration

Communicates with ABS & Transmissions from Bendix, Wabco and Allison

Tech to Tech remote communication function

 

 

How to Update Launch X431 PAD 5?

 

Run "SmartBox Tool 3.0" on the Windows desktop after installing "SmartBox_3.0_Setup".

 

3.1 Firmware Upgrade Function

SmartBox 3.0 can be upgraded through SmartBox Tool 3.0. Please select "M7 Upgrade" for the upgrading of lower programs and "A7 Upgrade" for the  upgrading of the system. Click "Browse" to select the path for storing upgrading files and click "Upgrade".

Note: Restart the software and SmartBox 3.0 upon completion of the upgrade. You can check the version to confirm whether the upgrade is successful.

 

3.2 Log View Function

When necessary, you can enable "Write Log File" or "Window Print Information" function to record the test status of SmartBox 3.0 and the process. To avoid software errors due to overlarge log files, do not enable the function if it is not necessary. The log files are saved under the root directory of disk C by default.

Steps: The corresponding J2534Log information can be generated by ticking the "Write Log File" option after clicking "View Log" in the upper left corner of the software interface, as shown below:

 

Note: Please restart the diagnostic software!

Note: If the log printing function is enabled, the log files may be very large as the information are written accumulatedly. Please enable this function when necessary, such as development and debugging. In other cases, please do not activate this function option at will.

The default storage path of the log file "J2534Log" generated is: C:Program FilesSmartBox 3.0SmartBox 3.0Log J2534_LOG.txt, as shown below:

 

Also note: In some computer systems, users have no write permission to this file folder, resulting in unsuccessful log file generation. It is necessary to modify the permissions of this folder (requiring administrator privileges), as shown below:

 

Right-click the "Log" folder, select the "Attribute" option and find the "Security" attribute, select current user, click "Edit", select the corresponding user name again, and tick all the "Allow" options in the permission column (requiring administrator rights), and click "OK" to go back.

 

 

Launch X431 PAD V 5 Package List

 

1 x X-431 PAD V main unit

1 x X-431 PAD V charging dock

1 x Smartbox 3.0 diagnostic connector

1 x Micro USB cable

1 x Cigarette lighter cable

1 x 5V DC out power adaptor

1 x Battery clamps cable

1 x OBD II extension cable

1 x Non-16pin connector converting cabel

1 x Password envelope

1 x Non-16pin connectors set