Monday 03 December, 2018 | RSS Feed

How to assemble the VVDI BE Key Pro PCB Board with Case ?

by Administrator

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
How to assemble the VVDI BE Key Pro PCB Board with Case ?
 
This post shows the general guide on how to assemble VVDI BE Key Pro imrpoved version with the Smart Key Shell 3 Button for Mercedes Benz.
 
1. Put the VVDI BE key Pro improved version PCB into the case.
 
2. Cover the bottom case.
 
3. Insert the battery and cover the case.
 
4. Push the metal strips on both sides into the right position.
 
If the rear metal component is first assembled, then the metal strips on both sides won't be able to pushed into the right position.
 
5. Here rearmetal button.
 
6.Put into the small key and start button.
 
If you want to disassemble the case, please do it from the last step to the first step.
 
Note: If the rear metal component is firstly assembled, then the metal strips on both sides won't be able to put into the right position.
 
 
 
 
 
                                                                                                                                                       OBD2SOFT.COM





News for Wednesday 18 July, 2018


View all news for Wednesday 18 July, 2018 on one page




Recent News




News archive